Hey guys. Are you a fan of the Aegis range by Geekvape? This time we’ll be covering a new Aegis device called Aegis Boost, and it is also the first pod system kit in the long line of Aegis. Ok, here we go!
Just like all previous Aegis devices, Geekvape Aegis Boost is IP67 waterproof, dustproof, and shockproof as well. Powered by a built-in 1500mAh battery and driven by the advanced AS chipset, the mod can fire from 5-40W and permits superfast firing in less than 0.08 seconds. The battery is charged via a 1.5A/5V micro USB port which firmware upgrades also occur via. On the control face, there is a 0.42″ OLED display screen with a horizontal menu and crystal clear vape data. For safety, the chipboard supports a range of safety features including overcharge protection, over-discharge protection, high current protection, high-temperature protection, switch timeout protection, and short circuit protection.
As for the pod, it can hold up to 3.7mL of your favorite e-juice and adopts a top-fill structure which makes refilling much easier. With purchase, you will get a 0.6ohm KA1 mesh coil from the box, the coil fires in the range of 20 to 25 watts and would produce adequate flavor and vapor thanks to the mesh heating zone. For those who prefer to build coils by themselves, the Boost pod is also compatible with rebuildable dripping tank atomizers (RDTA), which is quite unique for a pod system. At last, there is an adjustment knob on top of the control face, with which you can effortlessly tailor the airflow to your preference.
You may also like: Suorin Air $9.79
Parameters as below
Material: Zinc alloy + Top grain leather + silicone
Size: 106.8 * 27.7 * 39.2mm
Battery: 1500mAh built-in battery
Output Power: 5-40W
Input voltage: 3.0-4.25V
Output voltage: 1.0-6.0V
Pod Capacity: 3.7ml
Coil Resistance: 0.6ohm KA1 mesh coil(20-25W)
Refill Method: Top filling
Screen: 0.42 inch OLED display
Charging: Micro USB, 5V/1.5A
Firing speed: 0.08s